Race- Quad Frame Kit for the ambitious pilot
Series Rage and Rave are made for maximum durability and flexibility. So it' s easy to use additional accessory parts like camera mounts, bumper ect. This frame primarily consists of 4 mm thick arms and 2 mm thick Center Plates. Finest carbon fibre used for the best results and unnessesary drill holes on sensible positions avoided for the best stability. Mirco Barbs instead of lock nuts are used to save some weight.
The "Rave 210 "LR (Low Rider) Quad measures 210 mm from motor to motor and it has symmetrical wide X-layout for maximum 5 inch propeller.
This frame is prepared for different FPV Cameras.
A Sony HS1177 or Run Cam Swift can be mounted between the Side Wals or directtly on the main plate with the u-bolt.
The cam plate, which is included, have tol be mounted in 20 degree and it pick up a cam with 28 x 28 drill holes like the Run Cam PZ0420.
This kit also contain two accessory plates for easy placing additional partse.g. reciever. This plates come on top of the stack.
The rear of this frame have some easy and reliable options tho place the VTX and the antenna.
This kit also contains an antennamount plate for easy fixing for the popular TBS Unify.
By the use of the "Flat" design with 30 mm standoffs the frame shape seems compact and smart.
This is what you can see and also what fyou can feel.
The high class carbon fibreis made in germany and exactly cut by CNC.
The frame kit contains:
- Upper Centerplate of 2 mm carbon fibre
- Lower Centerplate of 2 mm carbon fibre
- Splitted Top Plate made of 2 mm carbon fibre
- Four arms made of 4 mm Carbon fibre
- Cam Plate made of 1 mm carbon fibre
- Two Side Walls made of 1,5 mm carbon fibre
- One Accessory Plate S
- One Accessory Plate M
- One Antennamount Plate made of 1,5 mm carbon fibre
Further included in delivery:
- 14 x countersunk head socket srew M3 x 8
- 2 x countersunk head socket srew M3 x 18
- 8 x countersunk head socket srew M3 x 10
- 8 x Micro Barbs M3 (already fitted)
- 4 x landing skids of Neopren
- 2 x standoffs M3 x 30
- 6 x standoffs M3 x 20
- 2 x standoffs M3 x 8
- 12 x standoffs M3 x 5
- 4 x black plasic screw M3 x 8 (have to be stripped down about 1 mm)
- 4 x black plastic nut M3
- 1 x rubber grommet
The weight of this frame kit amounts 148 gram
Recommended Motor: 22xx mit 2300 KV - 2500 KV
Recommended ESC: KISS 24 A or 30A, Littlebee 30 A, DYS 30 A or other ECS in this class
Recommended Flight Control: Kiss, Naze 32 or otherflight control with 30,5 x 30,5 bzw. 30 x 30 mounting holes
All frame parts for replacement are available.
The shown rc components (motors, ESCs, FC, receiver, ect) are not part of the delivery!
